EMP Vinyl Toy - Trollhunter - Jotnar

The third film I've chosen to create an illustrated poster/vinyl toy/other stuff combo for is Trollhunter. For those who haven't seen it, it's a Norwegian dark fantasy about a group of student who go to make a documentary about a bear poacher, but instead get tangled up chasing trolls around with the Trollhunter. It is a superb film. Here's a time-lapse of me making the toy.

The character I chose to depict from this film (sticking with the theme of the 'bad guys') was a Jotnar. A troll over 200 feet tall that the group encounter at the end of the movie. I used a 4inch white 'Kracka' DIY vinyl toy as the base & then applied a huge amount of Sculpey to the head to make it look entirely different. I spent a lot more time on this one with the Sculpey than I did on the BTILC toy & it shows. I sculpted the basic shape of the head and then applied extra features such as lips & ears from smaller sections, also applying extra layers to create contours on the cheek areas & forehead. I then used a pencil & a knife to push impressions into the Sculpey as there was a lot of wrinkles to depict.

I baked it, as before (10 minutes, 95degrees C) only this time I used a ceramic tray with a little bit of water in the bottom instead of a metal tray, this stopped the vinyl from melting but meant that the section of Sculpey touching the water didn't cook properly, so I tipped the water out & re-baked it for a couple of minutes to make it totally solid. After it had cooled I went straight in with a base coat of mid-grey. Once that had dried I mixed up a fairly dark, muddy green wash to overlay & get into all the creases of the face. I followed that up with a dark grey wash & once that had dried I added a mix of light grey & white dry brushing to really pick out some highlights on the face. Spray varnish was applied & left a couple of days to dry. 

I applied grey paint to a polishing...thing. I don't know what it's called. It's all fluffy & your meant to use it to polish cars with. I also added what can only be described as week-old paint pot water to give it a horrible green/grey/yellowy colour. Waited for that to dry, cut it up & used PVA to apply it to the figure, then I singed it with a lighter to make it matted & add a nice brown colour to some pieces.

EMP Vinyl Toy - Small Town Folk - Axe Killer (not quite finished)

Killer Mask Guy from Small Town Folk. If you don't know the movie you should check it out, it was shot in my hometown.

This is made using a 4inch glow in the dark DIY Munny toy which obviously I've customised by cutting the ears & tail off, painting & sewing the mask. There's also an axe to go with this but it's not painted yet, I may add some detail underneath the mask and I'm also going to make a second mask as this one is removable. I tried some different techniques to paint this from last time. I used fewer colours for a start which proved to make it a lot easier as you don't have to constantly be waiting for it to dry. I also watched some tutorials on painting vinyl toys and was convinced to use a wash. I painted the dungarees in a cerulean blue, then washed over that a couple of times with an ultramarine to pick out the detail, and then once more with a brown to give a muddy appearance. Then I did a little dry brushing to a couple of areas in a white to make the clothing look worn. After inking in the outlines I added a really light splatter to the front & the hands. The key to painting blood splatter is to be sparing, otherwise it looks really unrealistic.

Face zipped up.

Face unzipped.

 

Left hand side.

 

Back with buttons on mask.

 

Right hand side.

 

The point of getting the glow in the dark vinyl was so that it would shine out of the eyeholes & mouth. Unfortunately taking photos of this has proved to be fairly difficult. I will sort this out.

EMP Vinyl Toy - Big Trouble In Little China - James Hong

Shape It, Bake It, Paint It.

Here's a timelapse (with some significant sections missing) of me creating my first customised vinyl toy. 

Music: Crystal Effigy by Our Time Down Here.

http://www.facebook.com/Ourtimedownhere 

The subject is James Hong's character from Big Trouble In Little China. I used a 4inch Trexi model as a base and sculpey to add extra details. Also used a couple of screws as I felt that'd be preferably as a visual compared to trying to create a similar effect with the sculpey. Turns out this is actually really, really difficult & very time consuming but a lot of fun. Sculpting the right shapes without leaving marks is really awkward but it's a very versatile tool and holds a lot of strength in a thin sheet. I left the model in the oven for about 30 seconds too long and some sections of the vinyl started to melt which had to be rectified with a knife. Something to look out for if you make one yourself. Painting it was a delicate procedure which I completed in one colour at a time, luckily the model separates at various points which makes it considerably easier. Finished him up with some black ink details. One the paint is fully set (tomorrow) I shall be spray varnishing him for a nice shiny finish. I've already started my next one. Stay tuned.

It's all in the reflexes.